Related Products
Latest News
What is a high-speed automatic electroplating line?
March 8th at 5:46pm
The electroplating equipment adopts an efficient continuous electroplating production method, and the high-speed automatic electroplating line has the following characteristics: suitable for the small size and large batch of plated parts in the IC industry. The plating speed can generally reach 78m/min; High level of automation, accurate control, reducing the impact of human factors on product quality, capable of 24-hour continuous production; The plating quality is high, and the main plating type is tin or tin alloy, which can meet special requirements such as solderability, conductivity, and consistency. Each plating tank of the plating equipment is equipped with external devices such as rectifiers, heaters, filters, and cathode movement according to process requirements. To achieve automatic assembly line operations, the conservative electroplating process adopts a hanging plating method.
The hanging plating line consists of a series of plating slots arranged in a specific order. Set up several crane handling fixtures on the plating production line. The driving route of the plating line requires special and complex calculation methods, and in actual operation, it is necessary to prevent various unexpected situations and not switch production processes arbitrarily; Hanging the plating line requires manual binding of the sheet metal with copper wire onto the hanging fixture, and each production line requires multiple operators to perform the loading and unloading work.
Therefore, the radical hanging plating line has problems such as outdated technology, low production capacity, serious environmental and personal pollution, poor electroplating quality, and low qualification rate. The electroplating equipment electroplating tank system adopts a sub mother tank structure, namely a conveying device and an electroplating tank system. A high-speed automatic electroplating line generally consists of two parts. Lift the solution from the mother tank to the sub tank by the pump, and complete the pre-treatment, electroplating, cleaning and other processes for the material pieces in the sub tank. The solution then flows back from the sub tank to the mother tank. This cycle is repeated to ensure the continuous progress of the electroplating process; The conveying device adopts a circular design, utilizing a steel belt transmission structure and an automatic loading and unloading system to sequentially immerse the material sheets into the plating tanks of each workstation.